Shaped cuts on columns

[fish5133]

Found this video on you tube dated 2008 showing multiple shaped cuts but clean up crew say they made the cuts. Not best of quality . If video is genuine then it explains some of the diagonal cuts.

It suggests cuts were made from a crane. Not sure why a diagonal cut would be made unless it is to control the direction of the steel moving but i would presume the steel "candle" would be being held by a crane whislt cuts were made for the safety of the cutter.

Comment about the height of the pile not being as much as they expected "14 floors compressed into 8 ft"


Link

[Micpsi]

Sceptics of the hypothesis that thermate was used to help demolish the North & South Towers have been aware of this for years. I myself posted photos here
http://www.debunking911.com/thermite.htm
during the thermite/thermate debate several years back that show clean-up workers making diagonal cuts across steel columns to assist dropping them down in the same way that timber men cut tree trunks at an angle so as to make them fall in the direction they require. Unlike oxyacetylene torches and oxygen cutters, thermite does not make the clean cuts in steel visible in photos of Ground Zero during the clean-up. Here is photographic proof of oxygen cutters being used at Ground Zero:
http://11-settembre.blogspot.com/2007/02/technical-widening-about-ther mal.html

It's about time this 9/11 myth was put to bed.

[GodSaveTheTeam]

The shaped cuts on the columns at GZ was debunked a long time ago.

I always remember the quote from 9/11 Mysteries were the guy demonstrating the technique of shape cut demolition says they do it so the building "walks".

As soon as he says that, one remembers that none of the buildings "walked" on 9/11. Meaning that the desired effect of those particular shape cuts didn't happen.